Did you know that stucco can last up to 100 years if it is properly taken care of? Just because it lasts a long time doesn’t mean that it’s not susceptible to the elements. There could be holes and cracks that result in damage to the stucco and the underlying surface. You don’t want the small holes getting bigger as that could lead to structural problems. Excessive damages will mean looking for stucco contractors to get the job done right the first time.
If there are areas that have completely fallen off, there will be no other option but complete restoration. This shouldn’t be a DIY project as there could be complexes involved.
Remove the Loose Stucco
Removing the loose stucco will be the first place first step in the repair process. You can use a cold chisel or a hammer to break away pieces. You should be careful so as not to damage the underlying structure.
Adding Building Paper
Depending on the surface that needs to be repaired, you can start by cutting building paper that fits the area that needs to be patched. For effective moisture barrier protection, the pieces should cover the wood areas that are exposed. The first piece of paper should be stapled on the plywood sheathing or wood lath. The second piece should be used to cover the first.
You should follow the manufacturer’s specification when mixing the first batch of stucco. It is recommended that the mixed stucco is kept in a shaded area should be applied as soon as it is mixed. You have a 45-minute window to work with the mixed stucco.
Applying the Scratch Coat
This process can be a little bit challenging as your full concentration will be required. To prevent the premature drying of the new stucco, the areas around the edge of the path will need to be sprayed with water. A fist-size stucco will be applied on the metal lath. You know you’re on the right track if there is no support needed for the stucco to hold onto the mesh. The process will need to be repeated in the entire area that needs to be patched. The curing process can take up to two hours depending on your speed and the area being repaired.
Applying Final Coat
You have a mixture of stucco for the final coating. For aesthetics, you can go for custom colors. It can be a tad too complex to get the right colors that match the surrounding stucco. This is something to have in mind when choosing the final coat for the repair.
Given how the repairs are intricate and time-consuming, the best solution would be to reach out to a stucco contractor. You’re guaranteed that the repairs will be done right the first time. Make sure that you’re getting an experienced contractor for the job. For more information on stucco repairs and maintenance, you can check out https://dependexteriors.com/
Address: 8615 176 street NW Edmonton AB T5T 0M7