Stucco Repair Edmonton AB | EIFS Repair Company
Depend Exteriors offers stucco repair in Edmonton, AB, for local homes and businesses in the area. We fix cracks, moisture issues, and wall bulges using acrylic and EIFS systems. Our service is backed by a 3-year workmanship warranty and WCB coverage.
What sets our company apart?
- Over 15 years of experience
- Fully licensed and insured
- Our warranties and liability coverage protect your investment.
- We work around your business hours.
- We use durable solutions suited for Alberta’s weather.
Commercial & Residential Stucco Repair That Stops Heat-Loss
Our stucco repair services in Edmonton involve fixing cracks, holes, and insulation issues in your exterior walls. At Depend Exteriors, we repair damaged acrylic and EIFS walls so they stay strong through Alberta winters. Our stucco services are backed by a 3-year workmanship warranty and follow proper prep, mesh, patch, and colour-matching steps for long-lasting results.
If you’re seeing bubbles, bulges, or chunks falling off your wall, it might be more than surface damage. Book an inspection to find the cause.
Get stucco repair near you. Call (780) 710-3972.
EIFS Stucco Repair in Edmonton Alberta
EIFS stucco repairs involve fixing damaged layers of synthetic systems to restore insulation and prevent moisture issues. EIFS (Exterior Insulation and Finish Systems) are made of foam boards covered with mesh and a flexible finish coat. They help keep homes & businesses warm in winter and cool in summer.
Freeze–thaw cycles cause cracking or bulging in EIFS. Water gets behind the foam if seams are loose or damaged. If not fixed early, the foam can trap moisture, causing mould or rot behind the walls. Our stucco contractors in Edmonton gently remove damaged areas, install new mesh, and recoat the surface using breathable acrylic. We test moisture levels before and after.
Call (780) 710-3972 for exterior stucco repair in Edmonton.
Acrylic Stucco Repair in Edmonton
Our acrylic stucco repair services involve patching flexible coatings that protect properties from snow, rain, and extreme cold. Acrylic finishes are made with plastic resins instead of cement. This makes them less likely to crack when Edmonton’s temperatures swing from +20 °C to −30 °C.
Over time, acrylic surfaces can bubble, peel, or fade. Most damage starts where water leaks behind the finish or at joints around windows and doors. We scrape out loose areas, apply new mesh if needed, and recoat with colour-matched acrylic. Repairs blend in and stay flexible in cold weather.
Stucco Crack Repair in Edmonton
We seal surface or deep wall cracks during our stucco crack repair to stop water from getting in and spreading damage. Cracks often form due to shrinkage, impact, or thermal stress. Alberta’s freeze–thaw cycles make this worse. Small gaps grow larger if water enters and freezes behind the wall.
We start by widening the crack slightly so filler sticks properly. Then we insert mesh for strength, apply new stucco, and texture the surface to match your home or business. For larger gaps or those near corners, we check if water has entered the base layer or the foam behind it.
Leaving gaps open can lead to mould, peeling paint, or wall rot. That’s why you need to fix them fast, especially on older buildings.
Call (780) 710-3972 for stucco crack repair near you.
Stucco Wall Repair in Edmonton
Stucco wall repair services focus on repairing large damaged sections to restore strength and prevent more severe issues. This work goes beyond hairline cracks or minor patches. It usually includes peeling, bulging, or missing areas where water or weather has broken the finish.
We inspect the wall first to see if the damage is just on the surface or deeper in. Then we remove all weak material, apply new mesh and bonding agents, and coat the surface with fresh plaster. We blend the texture to match the rest of your wall. If the building uses acrylic or EIFS, we repair using the same type. Wall repairs are common in older homes, buildings with poor drainage, or after heavy hail. Professional repairs add years of life to your exterior and protect against bigger costs later.
Stucco Patching in Edmonton
Stucco patching is a fast way to fix small chips, dings, or holes on exterior walls. It works best for minor damage under 12 inches wide, such as from a shovel scrape, a child’s bike, or hail impact. Edmonton’s cold winters and dry air can cause even small patches to fail if not sealed properly.
We clean the spot, remove any crumbling bits, and fill it with matching acrylic. For textured surfaces, we use a sponge or brush to blend the top. Patches dry quickly, so you can paint over them in a day or two, depending on the weather. Although patching is quick, it won’t fix deeper issues. If you see many patches needed in one area, a complete repair may be more cost-effective.
Our 5-Step Crack-to-Colour Repair Process
Our work involves more than patching damage. It’s about rebuilding strength and matching texture. Here’s how we do it:
- Surface Grinding – We clean and widen gaps for better bonding.
- Moisture Testing – If damage is deep, we test for water before sealing.
- Mesh Embedding – We insert a mesh over weak areas for reinforcement.
- Acrylic Coating – We apply colour-matched acrylic.
- Sealing & Inspection – We seal the repair and inspect final adhesion.
This step-by-step process helps ensure that repaired walls resist future cracking or bubbling in Edmonton’s climate.
Call (780) 710-3972.
Local Stucco Contractors Offering Warranty on Our Service
Our local stucco contractors provide a 3-year workmanship warranty on our services. This warranty means that if the repaired area peels or separates due to improper application or material failure within three years, we will fix it at no extra cost.
It gives property owners confidence that our work can withstand freeze–thaw cycles in high-stress areas like wall joints and corners. This coverage applies to both residential and commercial projects, including new construction in areas like St. Albert and Sherwood Park.
Call (780) 710-3972 now!
Depend Exteriors
8615 176 St NW, Edmonton, AB T5T 0M7
Operational Hours:
Monday – Friday: 8 AM to 7 PM
Saturday & Sunday: 8 AM to 3 PM
FAQs
When is stucco remediation in Edmonton necessary?
Stucco remediation is needed when water damage or hidden moisture is affecting the layers behind the wall. This means fixing trapped water, mould, or broken mesh underneath. The affected areas are removed, the wall is dried out, and the system is rebuilt so it lasts.
What does stucco maintenance in Edmonton involve?
Stucco maintenance involves inspecting for gaps, cleaning the surface, and resealing areas exposed to the weather. Over time, freezing and thawing can cause damage. You should look for peeling or changes in colour. We recommend having your exterior checked every 2–3 years to stop bigger problems early.
Should I fix my stucco before or after exterior renovations?
It’s best to do repairs after major renovations so the finish stays clean and undamaged. For example, if you’re replacing windows, wiring, or drainage systems, do those first. Then we can seal everything properly and match the texture after the job is done.
How do I know what my stucco needs?
Your needs depend on the age, type, and extent of the damage. If you have small gaps, a patch may be enough. If pieces are falling off, you might need complete repair. EIFS or acrylic needs different materials than older cement types. We’ll inspect your walls and recommend the best solution.
When should I consider new stucco installation services?
If your exterior walls show widespread cracking, moisture damage, or detachment from the base layer, it may be time for installation services. Homes older than 30 years with failing finishes often benefit more from a fresh system than repeated patch jobs. With our expertise, we inspect the substrate and existing cladding to advise whether your issues can be repaired or need full replacement.
Can parging repairs improve the look of older buildings in St Albert?
Yes. Parging repairs can restore older buildings in St Albert to their clean and strong appearance. If the base of your walls is chipped or flaking, new parging smooths out the surface and protects against water damage. It’s a simple step that adds fresh curb appeal and extends the life of your buildings.
Do I need stucco maintenance on a new construction project?
Yes, even new construction projects need regular stucco maintenance to prevent future damage. While it may look perfect in a new construction, maintenance helps ensure everything was done to your satisfaction.
How much does EIFS repair cost?
For most residential projects, fixing gaps costs between CAD 8 and 50 per square foot. Read more about estimated costs in our guide. EIFS or full wall repair is more expensive due to the material and moisture remediation.
Final cost depends on:
- Wall height & access
- Type of finish (acrylic vs traditional)
- Extent of moisture damage
We’ll inspect your wall and provide a free estimate.
thin brick
fireproof
One of the best fireproof exterior and interior systems out there.
maintenance
Wipe, pressure wash or paint it. Thin brick is easy to take care of.
identical
It’s real brick. Just cut and made thinner. Even masonry repair experts would have a hard time distinguishing it from a full brick.
security
Thin brick provides stronger walls than many of exterior wall systems.